Transducers
36
Compact Operating Instructions, 09/2018, A5E43390688-AB
Applications
A
Note
•
The transducer is to be used only in the manner outlined in this operating instructions.
•
Normally, the transducer requires no cleaning or maintenance. However, if performance
changes are observed, immediately shut down the level measurement system and
perform a thorough inspection, especially on the transducer.
•
An XPS-15F transducer is shown in these examples. An explosion proof conduit seal may
not be required.
A.1
Liquids applications
A.1.1
Stilling well with standpipe
Open Channel Flow Measurement
A stilling well and/or standpipe is hydraulically connected to the primary element and used to
reduce the effect of waves and surges that may be present in a primary element. Stilling well
and/or standpipe are most often found in older installations where a floating gauge may have
been used.
Summary of Contents for SITRANS 7ML1100
Page 54: ......
