manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 308 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 308

3RA1 fuseless load feeders

SIRIUS System Manual

5-18

 

GWA 4NEB 430 0999-02b

5.5 Mounting and connection

5.5.1 Mounting

Snap-on attachment

The fuseless load feeders can be snapped onto a 35 mm rail in acc. with 
DIN EN 50 022.

Rail mounting without 
adapter

The fuseless direct feeders of frame sizes S00 and S0 and reversing feeders 
S00 can be snapped onto the rail without an adapter with the circuit breaker. 
No tools are required for either mounting or removal.
A rail adapter is available as an accessory for frame sizes S00/S0. The 
reversing feeders of frame sizes S2/S3 are mounted with a rail adapter.

Rail mounting with 
adapter

To mount frame sizes S2 and S3 and reversing feeders S0 on a rail, adapters 
must be used for stability reasons. These are available as accessories. To 
remove them, the rail adapter is unlocked with a screwdriver. You will find 
information on this in Section 2.5.1 on how to mount circuit breakers.

All feeders can be mounted with a rail adapter.

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments