manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 185 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 185

3RT1/3RH1 contactors

SIRIUS System Manual

GWA 4NEB 430 0999-02b

3-77

Installation

Figure 3-59: Surge suppressors, installation

Installation instruc-
tions for frame sizes 
S0 to S3

Important

The 3RT1926-1E.00 diode combination is inserted from above. The direction 
of attachment is defined by a code.
Alternatively, the 3RT1926-1T.00 diode combination can be inserted from 
below. The direction of attachment is not coded, but the terminals are mar-
ked with "+" and "-" so that the direction is clear.

Frame size S00

The surge suppressor is attached 
on the front of the contactors. 
There is space next to the 
attached auxiliary switch block.
The direction of for attachment is 
defined by a code.

Frame sizes S0 to S3

Varistors, RC elements, and 
diode combinations can either be 
inserted and snapped on from 
above or below directly onto the 
coil terminals.

To remove them, press the varis-
tors, RC elements, and diode 
combinations forwards, and 
remove them from the recess.

2

1

2

1

1

2

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments