manualshive.com logo in svg

Siemens SIRIUS, System Manual, Page: 161 / 425

Share
Download
Siemens SIRIUS System Manual Download Page 161

3RT1/3RH1 contactors

SIRIUS System Manual

GWA 4NEB 430 0999-02b

3-53

Electronically opti-
mized auxiliary switch 
blocks

The electronically optimized auxiliary switch blocks contain enclosed switch-
ing elements that are particularly suitable for switching low voltages and 
currents (hard gold-plated contacts) as well as for use in dusty atmospheres. 
The rated operational current is I

e

/AC-14 and DC-13: 1 to 300 mA, voltage: 3 

to 60 V.
The electronically optimized auxiliary switch blocks are available as screw-
type or Cage Clamp terminal types:
• Frame size S00 (3RH1911-.NF..): Has two enclosed auxiliary contacts (1 

NO c 1 NC contact, 2 NO or 2 NC contacts

• Frame sizes S0 to S3 (3RH1921-.FE22): Has two enclosed auxiliary con-

tacts and two standard auxiliary contacts, each 1 NO c 1 NC con-
tact

• The switched current is in acc. with the VDE 0435 regulation for relays.

Auxiliary contacts

The following table gives you an overview of all the available auxiliary con-
tacts:

Table 3-22: Auxiliary switch blocks

Adding to the auxiliary 
contacts

• The 3RT10 basic units of frame size S00 with an integrated auxiliary con-

tact can be supplemented with up to 4 contacts using attachable auxiliary 
switches.

• The basic units of frame sizes S0 to S3 do not have any auxiliary switches, 

but auxiliary switches can be attached at the front or the side.

Auxiliary contacts and atta-
chable accessories

Frame size S00

Frame sizes S0 to S3

Integrated auxiliary contact

1 integrated auxiliary 
contact

---

4-pole auxiliary switch

Attachable at the front

Attachable at the front

2-pole auxiliary switch

Attachable at the front

---

1-pole auxiliary switch

---

Attachable at the front

1-pole auxiliary switch (infeed 
from 1 side)

Attachable at the front

---

2-pole auxiliary switch (infeed 
from 1 side)

Attachable at the front

Attachable at the front

2-pole auxiliary switch

---

Attachable at the side

Time-delay auxiliary switch 
blocks

Attachable at the front

Attachable at the front

Electronically optimized auxil-
iary switches

Attachable at the front

Attachable at the front

Summary of Contents for SIRIUS










































































































































































































































































































































































































































Reviews:

No comments