Siemens SIRIUS ACT 3SU1 System Manual Download Page 433

Page: 433 / 610

3SU19 accessories

13.11 Miscellaneous accessories

SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010

433

13.11.3

Additional Accessories

Siemens Industry Mall

(

http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221537

)

Description

Material

Article number

PCB carrier
The drill-hole spacing of the PCB

carrier is: 20.5 mm

Plastic

3SU1900-0KA10-0AA0

Standard mounting rail adapter
The standard mounting rail adapter

can be used in conjunction with the

3-slot holder (3SU15.0-0AA00-

0AA0), 1-pole contact modules and

LED modules.
The contact modules must not be

stacked in this case.
You will find more information in

Chapters "3SU15 holders

(Page 213)" and "3SU14 modules

(Page 169)".

Plastic

3SU1900-0KH80-0AA0

Pressure plate
Pressure plate for selector switches,

twin pushbuttons and key-operated

switches
Lock for controlling which contact

modules are to be operated.
You will also find information in

Chapter "Selector switches

(Page 69)".

Plastic

3SU1900-0KC10-0AA0

Adapter
Adapter for actuators and indicators

with front ring for flat mounting
The adapter is needed for all

30.5 mm actuators and accessories.
The adapter is included in the scope

of supply of the actuator and

accessories.

Metal

3SU1950-0KJ80-0AA0

Adapter
Adapter for installing 22.5 mm

actuators in a 30.5 mm mounting

hole. The adapter corresponds to

the contour of the actuators with a

30.5 mm mounting diameter.

With the adapter, all 22.5 mm

pushbuttons can also be used in a

30.5 mm mounting hole.

Metal

shiny
Metal

matte

3SU1950-0KB10-0AA0
3SU1960-0KB10-0AA0

Summary of Contents for SIRIUS ACT 3SU1



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIRIUS ACT 3SU1

Reviews:

Siemens SIRIUS ACT 3SU1, System Manual, Page: 433 / 610

Search results

Summary of Contents for SIRIUS ACT 3SU1

Reviews: