Siemens SIRIUS ACT 3SU1 System Manual Download Page 243

Page: 243 / 610

3SU18 enclosures

10.3 Enclosures with standard fittings

SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010

243

10.3.2

Enclosures with standard fittings for AS-Interface

The enclosures with integrated AS-Interface are equipped with contact modules and LED

modules with spring-loaded terminals from the SIRIUS ACT series as well as the slave(s)

required for connecting the contact modules and LED modules to AS-Interface. Wiring is

carried out at the factory. You only need to connect the enclosure to the ASi bus. For

information, please refer to Chapter "Connecting (Page 274)".
Enclosures with standard fittings are available in the following versions:

●

1 to 3 command points

●

Operational voltage through AS-Interface (approx. 30 V)

●

Vertical mounting type

●

Plastic enclosure with plastic actuating and signaling elements

●

Metal enclosure with metal actuating and signaling elements

The enclosures without EMERGENCY STOP each have one A/B slave 4I/3O; the

enclosures with EMERGENCY STOP mushroom pushbuttons have an AS-Interface F slave

mounted in the enclosure.
For enclosures with EMERGENCY STOP mushroom pushbuttons, two NC contact modules

are mounted inside the enclosure and wired to the safe F slave. The contact or LED modules

of the pushbuttons as well as the AS-Interface slaves are secured by base mounting and

connected via cables.
The plastic enclosures are designed with a connection for the AS-Interface flat cable (the

cable is routed along the outside of the enclosure). For metal enclosures, the AS-Interface

cable is run inside the enclosure (round cable connection).

Plastic version
Siemens Industry Mall (

https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221524

)

No. of

command

points

Fittings

Color of the actuating or

signaling element

Label

Article number

EMERGENCY STOP

mushroom pushbuttons

Red

Label without inscription 3SU1801-0NB10-4HB2

Pushbuttons
Pushbuttons

Red
Green

"O"
"I"

3SU1802-0AB10-4HB1

Pushbuttons
Pushbuttons

Black
White

"O"
"I"

3SU1802-0AC10-4HB1

Pushbuttons
Pushbuttons
Indicator lights

Red
Green
Clear

"O"
"I"
Label without inscription

3SU1803-0AB10-4HB1

Summary of Contents for SIRIUS ACT 3SU1



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIRIUS ACT 3SU1

Reviews:

Siemens SIRIUS ACT 3SU1, System Manual, Page: 243 / 610

Search results

Summary of Contents for SIRIUS ACT 3SU1

Reviews: