Siemens SIRIUS 3RW40, Manual

Page: 43 / 212

Functions
5.6 Functions of the outputs
SIRIUS 3RW30 / 3RW40
Manual, 01/2010, 535 1995-02 DS01
43
For a state diagram of the contacts and the LEDs in the various operating and fault states,
refer to chapter Diagnostics and fault signals [Page 44].
For recommended circuits, refer to chapter Typical circuit diagrams [Page 167].
5.6.3 3RW40: Group fault output at terminal 95 / 96 / 98 OVERLOAD / FAILURE
If there is no rated control voltage or if a failure occurs, the potential-free FAILURE /
OVERLOAD output is switched.
For recommended circuits, refer to chapter Typical circuit diagrams [Page 167].
For a state diagram of the contacts in the various fault and operating states, refer to chapter
Diagnostics and fault signals [Page 44].
t
R on
t
R on
U
S
U
N
U
t
R off
t
t
R off
t
ON 13/14
BYPASSED 23/24
RUN 13/14
t
R on
t
R off
t
IN 13/14