manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 566

SIRIUS 3RA21/22 load feeders 

 

6.2 Product description 

 

SIRIUS Innovations 

566

 

System Manual, 01/2011, A8E56203870002-03 

6.2.2.1

 

Pre-assembled complete devices 

Pre-assembled complete devices 

3RA2 fuseless load feeders are pre-assembled complete devices; they are delivered ready-

wired and with all mechanical connections established. The devices are available in 

sizes S00 and S0 for direct-on-line starting or reversing operation. The fuseless load feeders 

can be ordered with or without pre-assembled busbar adapters for mounting on a DIN rail or 

busbar. 

Connection systems 

3RA2 fuseless load feeders are available with the following connection system options. 

Table 6- 4 

Connection systems available for 3RA2 fuseless load feeders 

Connection system 

3RA2 pre-assembled complete devices 

Screw connection 

✓

1)

 

Spring-loaded connection 

✓ 

Ring cable lug connection 

--- 

1)

  The link module for the S00 load feeder can also be used to mount an S00 contactor on an 

S0 motor starter protector. 

Rated powers 

3RA2 pre-assembled feeders are dimensioned for the following powers: 
●

 

Direct-on-line starters up to 15 kW (32 A) 

●

 

Reversing starters up to 15 kW (32 A) 

Control supply voltages of 3RA2 load feeders 

3RA2 pre-assembled feeders are suitable for the following rated control supply voltages: 
●

 

230 V AC / 50/60 Hz 

●

 

24 V DC 

 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands