manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 533

 

SIRIUS 3RU2/3RB3 overload relays 

 

5.9 Accessories 

SIRIUS Innovations 
System Manual, 01/2011, A8E56203870002-03 

533

 

5.9.6

 

Sealable cover 

5.9.6.1

 

Description 

Sealable cover 

There is one sealable cover for thermal overload relays and one for solid-state relays; both 

are compatible for use with all sizes. The 3RV2908-0P cover can be used as an accessory 

for 3RU2 thermal overload relays and 3RV2 motor starter protectors/circuit breakers (acc. to 

UL). 
The sealable cover can be used to protect the rotary button for setting the rated motor 

current and the CO contact for the tripping classes (3RB31 only) against unauthorized 

manipulation.  

5.9.6.2

 

Mounting 

Table 5- 31  Mounting the sealable cover on the 3RU21 overload relay 

Step 

Operating instruction  

Figure 

1 / 2 

Attach the hooks on the cover to the openings on the 

overload relay and fold the cover down. 

 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands