manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 432

SIRIUS 3RV2 motor starter protectors 

 

4.9 Accessories 

 

SIRIUS Innovations 

432

 

System Manual, 01/2011, A8E56203870002-03 

4.9.9

 

Enclosures and mounting accessories 

4.9.9.1

 

Description 

General  

Plastic enclosures for surface mounting and molded-plastic enclosures for flush mounting 

are available in various dimensions for the stand-alone assembly of size S00 (I

n max 

= 16 A) 

and S0 (I

n max 

= 32 A) motor starter protectors. 

In the case of installation in molded-plastic enclosures the rated operational voltage U

e

 of the 

motor starter protectors is 500 V. 
The enclosures for surface mounting have IP55 degree of protection and those for flush 

mounting also meet the requirements for IP55 degree of protection at the front (the flush-

mounted section complies with IP20). 

Enclosures 

All enclosures are equipped with N and PE terminals. They have 2 knockout cable entry 

openings for cable glands at the top and 2 at the bottom, along with corresponding cable 

entries scored on the rear. There is a knockout on the top of the enclosure for indicator lights 

which are available as accessories. 
The slim-line enclosure can accommodate a motor starter protector without accessories, with 

transverse and lateral auxiliary switches. There is no provision for installing a motor starter 

protector with signaling switch. 
In the case of size S00 and S0 motor starter protectors, the molded-plastic enclosures are 

fitted with a rotary operating mechanism. 
The enclosures are available either with a black rotary operating mechanism or with an 

EMERGENCY STOP rotary operating mechanism with red/yellow handle. 
In the OFF setting, all rotary operating mechanisms can be locked with up to three padlocks. 

Front plates 

Many applications require motor starter protectors to be actuated in any type of enclosure. 

Front plates equipped with a rotary operating mechanism are available for size S00 and S0 

motor starter protectors for this purpose. 
A holder for size S00 and S0 motor starter protectors is available for the front plates (the 

motor starter protectors snap into the holder). 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands