manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 424

SIRIUS 3RV2 motor starter protectors 

 

4.9 Accessories 

 

SIRIUS Innovations 

424

 

System Manual, 01/2011, A8E56203870002-03 

4.9.8

 

Door-coupling rotary operating mechanism 

4.9.8.1

 

Description 

Door-coupling rotary operating mechanism  

Motor starter protectors with a rotary operating mechanism can be installed in the control 

cabinet and operated externally by means of a door-coupling rotary operating mechanism. 

The mechanism engages when the control cabinet door closes. If the motor starter protector 

is active, the coupling locks, thereby preventing the door opening unintentionally. This lock 

can be deactivated by maintenance personnel. In the OFF setting, the rotary operating 

mechanism can be secured against reclosing with up to 3 padlocks. The padlocks prevent 

the door from opening unintentionally.  

Door-coupling rotary operating mechanisms 

The door-coupling rotary operating mechanisms comprise a knob, a coupling driver, and an 

extension shaft 130/330 mm in length (6 x 6). They are dimensioned for IP65 degree of 

protection. The interlocking of the door prevents the unintentional opening of the control 

cabinet door when the switch is set to ON. The OFF setting can be locked with up to 3 

padlocks.  

Door-coupling rotary operating mechanism for arduous conditions 

The door-coupling rotary operating mechanisms comprise a knob, a coupling driver, and an 

extension shaft 300 mm in length (8 x 8 mm), a spacer and two metal brackets, which are 

used to mount the motor starter protector. 
The door-coupling rotary operating mechanisms are dimensioned for IP65 degree of 

protection. The interlocking of the door reliably prevents the unintentional opening of the 

control cabinet door when the switch is set to ON. The OFF setting can be locked with up 

to 3 padlocks.  
Laterally mountable auxiliary releases and 2-pole auxiliary switches can be used. The door-

coupling rotary operating mechanisms meet the requirements for isolating function according 

to IEC 60947-2.  

Versions 

Door-coupling rotary 

operating mechanism 

Versions 

Width 

Mountable 

Door-coupling rotary operating mechanisms 
Door-coupling rotary 

operating mechanism 

Black 

Depending on version 

Depending on version 

EMERGENCY STOP 

door-coupling rotary 

operating mechanism  

Red/yellow 

Depending on version 

Depending on version 

Door-coupling rotary operating mechanism for arduous conditions 
Door-coupling rotary 

operating mechanism 

Gray 

Depending on version 

Depending on version 

EMERGENCY STOP 

door-coupling rotary 

operating mechanism 

Red/yellow 

Depending on version 

Depending on version 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands