Siemens SIRIUS 3RH Series System Manual Download Page 25

Page: 25 / 786

System overview

1.4 Overview

SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03

1.4

Overview

1.4.1

SIRIUS modular system

The SIRIUS product range comprises devices for use in switching, starting, protecting, and

monitoring, as well as combinations thereof, which are known as "load feeders". Load

feeders can be created from the following devices:
●

3RT/3RH contactors

●

3RF solid-state switching devices

●

3RW soft starters

●

3RV motor starter protectors

●

Thermal (3RU) or solid-state (3RB) overload relays

●

3RR monitoring relays

Since all devices are matched to one both electrically and mechanically, they can be

combined really easily to create load feeders. Alternatively, pre-assembled 3RA2 load

feeders or 3RA6 compact starters are also available.
The devices named above are supplemented for the main circuit by devices for the control

circuit: 3RA28 function modules for mounting on 3RT2 contactors and 3RA27 function

modules for connection to the higher-level control.

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands

Siemens SIRIUS 3RH Series, System Manual

Search results

Summary of Contents for SIRIUS 3RH Series

Reviews:

Brands by name

Popular brands