manualshive.com logo in svg

Siemens SIRIUS 3RH Series, System Manual

Share
Download
Siemens SIRIUS 3RH Series System Manual Download Page 189

 

SIRIUS 3RT2 contactors/contactor assemblies 

 

2.7 Accessories 

SIRIUS Innovations 
System Manual, 01/2011, A8E56203870002-03 

189

 

2.7.8

 

Control kit for manual operation of contactor contacts 

2.7.8.1

 

Description 

The 3RT2916-4MC00 control kit is a tool used for operating (closing) the auxiliary contacts of 

the 3RT201 power contactors (size S00) manually during commissioning (load-free 

switching). The module is used to check the wiring and the motor direction of rotation under 

conditions of short-circuit protection.  
 

2.7.8.2

 

Mounting 

 

CAUTION 

 

Disconnect the contactor from the power supply before you attach or remove the control kit.
Only use the control kit for test purposes during commissioning. 

 

 

Table 2- 42  Mounting the control kit  

Step 

Operating instruction 

Image 

1 

Attach the control kit to the contactor from 

the front. 

2 

Press the control kit down until it engages. 

Summary of Contents for SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands