Siemens SIRIUS 3RA Equipment Manual Download Page 8

Page: 8 / 166

1.3

Required basic knowledge

To understand these operating instructions you should have a general knowledge of automation
engineering and low-voltage switchgear.

1.4

Scope of the manual

The manual is valid for these fuseless load feeders. It contains a description of the devices that
is valid at the time of publication.

1.5

Siemens Industry Online Support

Information and service

At Siemens Industry Online Support you can obtain up-to-date information from our global
support database:

• Product support

• Application examples

• Forum

• mySupport

Link: Siemens Industry Online Support (

https://support.industry.siemens.com/cs/de/en

)

Product support

You can find information and comprehensive know-how covering all aspects of your product
here:

• FAQs

Answers to frequently asked questions

• Manuals/operating instructions

Read online or download, available as PDF or individually configurable.

• Certificates

Clearly sorted according to approving authority, type and country.

• Characteristics

For support in planning and configuring your system.

• Product announcements

The latest information and news concerning our products.

• Downloads

Here you will find updates, service packs, HSPs and much more for your product.

Introduction
1.5 Siemens Industry Online Support

SIRIUS 3RA Load Feeders

Equipment Manual, 02/2022, A5E03656507520A/RS-AC/004

Summary of Contents for SIRIUS 3RA







































































































































































Search results

Summary of Contents for SIRIUS 3RA

Reviews:

Brands by name

Popular brands

Siemens SIRIUS 3RA, Equipment Manual

Search results

Summary of Contents for SIRIUS 3RA

Reviews:

Brands by name

Popular brands