manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Service Instructions Manual, Page: 75 / 86

Share
Download
Siemens SIREMOBIL Compact L Service Instructions Manual Download Page 75

Replacing boards / replacing components

6 - 23

Siemens AG

 

SPR2-130.061.02

Page 23 of 28

SIREMOBIL Compact

Medical Solutions

Rev. 11

09.04

CS PS 24

System Manual

 

MEMOSKOP C-SUB/ MEMOSKOP C-SUB & MOD

6

•

Replace the MEMOSKOP C-SUB.
The attachment screws are accessible on the underside of the storage device.

•

Check the software status of the MEMOSKOP. Download the system software status to 
the MEMOSKOP if necessary.

•

Use the MEMOSKOP Service Software to import the language file.

•

Set the MEMOSKOP C-SUB to the correct video frequency and configure it for the num-
ber of existing monitors.
Refer to Chapter 5 "Configuring the video frequency " and "MEMOSKOP - Configuration 
for the number of existing monitors".

•

Configure the following parameters in Technical Setup for MEMOSKOP:

Check the software status of the newly delivered MEMOSKOP. 
If the software status of the MEMOSKOP differs from that of the 
system, the system software status must be downloaded to the 
MEMOSKOP. The MEMOSKOP software status is displayed in the 
2nd line of the User Setup. The first number describes the 
MEMOSKOP type (2=CE; 3=CE-100/ C/ C & MOD; 4=C-SUB/ C-SUB 
& MOD).

Read and record the parameters for MEMOSKOP C-SUB if you 
can select User setup. 
After replacing, configure the MEMOSKOP C-SUB according to 
the parameters recorded.

Number of monitors

Configure 1 for SIREMOBIL Compact with 1 monitor.
Configure 2 for SIREMOBIL Compact with 2 monitors.

Hardcopy

Check whether 5000 is programmed in "4 Max Hard-
copy time". If not, program this value.

Edge 1 coef set

Check whether 3 is programmed, If not, program this 
value.

Edge 2 coef set

Check whether 8 is programmed, If not, program this 
value.

Motion detection setup

Check whether the following are programmed "MD1: 
Threshold" 100 and for "MD2: Threshold" 120. If not, 
program these values.

Date / Time format

Set the country-specific format.

Keyboard

Set to the keyboard layout being used.

Language

Set for language of the country.

Display of realtime clock

Configure Yes. Select No only upon customer request.

Display of rotated image

Configure Yes.

Monitor zoom

Configure No.

NOTE

NOTE

Summary of Contents for SIREMOBIL Compact L























































































Reviews:

No comments