Siemens SIREC D200, Manual

Page: 69 / 286

43-TV-25-35 GLO Iss.4 Dec 06 UK 63
A5E01001767-04
Power up
• Group - This pen can be allocated to a group of pens. Select this to display the list of
available Pen Groups. If you select a group here this pen will be added to it. The group
can then be renamed, to rename these groups, see
“Groups” on page 99.
• Colour - Each Pen has a Default Pen Colour but this can be changed if required. Select
and use the colour palette to set the pen colour.
• Trace Width - Select and set the Trace Width for this pen when it is displayed on a
chart. The default trace width is 1 with a maximum of 7.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
Scale Menu
(Main Menu > Configure > Setup > Edit Setup> Pens > Scale)
Individually configure each scale per pen in the scale menu.
Click on Scale to set up each scale profile per pen.
• Units - Scale measurement Units. Select this and enter the units. Up to 16 characters.
• Span - This is the highest value of the scale. Select to enter the Span value.
• Zero - This is the bottom of the scale. Select to enter the Zero value.
• Scale Type - Toggle between Linear or Logarithmic (Log).
• Divs Select - Only available with Linear Scale Type. Toggle between Auto or User
Defined.
• Major Divs - Only available when Divs Select is set to User Defined. Select and enter
the major division position.
• Minor Divs - Only available when Divs Select is set to User Defined. Select and enter
the minor division position.
Select the Scale button to take you to the Scale menu
Menu path to current menu