Siemens SIREC D200, Manual

Page: 117 / 286

43-TV-25-35 GLO Iss.4 Dec 06 UK 111
A5E01001767-04
Power up
Delete User
(Main Menu > Configure > Passwords > User Admin > Delete User)
This will list all the current users that have been entered into the password system. The Ad-
ministrator can delete users from a drop down list.
Note: Administrator cannot be deleted.
When the configuration is complete select the Finish button to Commit or Discard. Select
the Back button to return to the previous menu.
Unlock User
(Main Menu > Configure > Passwords > User Admin > Unlock User)
This will list the current users that have been entered into the password system. The Admin-
istrator can unlock a user that has been timed-out (eg. password expiry) by selecting a user
from a drop down list. Select the user and choose Re-enable Current or Reset to Default,
that will set it back to the original setting.
Reset Passwords
(Main Menu > Configure > Passwords > User Admin > Reset Password)
This will produce a text box warning that if you reset the passwords all the current settings
will be lost and the password system will return to the factory default setting. Select whether
to Continue or Stop the reset procedure.
Change Passwords
(Main Menu > Configure > Passwords > Change Passwords)
The Change Password function can be accessed by all users. Select Change Password and
enter your user name and old password, you will then be prompted to enter your new pass-
word twice to confirm.
Settings
(Main Menu > Configure > Settings >)
Set Time
Set up the Time and Date for the recorder’s real-time clock. Check that the correct Time
Zone is set before setting the clock.
See “Localisation” on page 91
Date
Select each button to set the day, month and year. This will automatically update and be
displayed on the Menu bar at the top of the process screen.
Time (HH:MM:SS)
Select each button to set the hours, minutes and seconds. The hours selection provides a
list and the minutes and seconds require a numeric entry. This will automatically update and
be displayed on the Menu bar at the top of the process screen. The recorder uses a 24 hour
clock.
Tick to confirm the setup changes and return to the Settings menu. Select the cross to ignore
any changes and return to the Settings menu.
From the Settings menu select the Finish button to commit the changes or select the Back
button to return to the previous menu.