Preface
7SJ61...7SJ63, 7SJ65, 6MD63 PROFIBUS-DP – Bus mapping
C53000-L1840-B006-02
ii
The PROFIBUS-DP specification and the structure of the PROFIBUS-
DP messages are defined in the European standard EN 50170:
Ø
PROFIBUS
Specification
Normative Parts of PROFIBUS-FMS, -DP., -PA
According to the European Standard
EN 50170 Volume 2
Edition 1.0, May 1998
PROFIBUS Nutzerorganisation e.V.
Order-No. 0.032 or 0.042 on CD ROM
Notes to this
manual
This manual provides you with the following aids to make it easier to
locate the information you are looking for:
•
At the beginning of this manual you will find a complete table of
contents plus separate lists of figures and tables contained in this
manual.
•
In the individual chapters, you will find information in the left margin
of each page which will give you an overview of the contents of that
particular paragraph.
•
Following the last chapter of this manual, you will find a glossary
containing definitions of technical terms and abbreviations used in
this manual.
•
At the end of this manual, you will find a comprehensive index for
fast access to the information you need.
Validity
This manual is valid for
•
SIPROTEC devices 7SJ61...7SJ63, 7SJ65, 6MD63 with:
•
firmware version 4.2 or higher (7SJ65: version 4.3 or higher)
and
•
PROFIBUS-DP communication module version 01.01.02 or
higher.
For device parameterization
DIGSI version 4.2 or higher
has to be
used.
Training courses
See our catalog of courses for a list of available courses or contact our
Training center in Nuremberg.
Questions
If you have questions to the SIPROTEC devices, contact your Siemens
representative.
