Control During Operation
234
7SS52 V4 Manual
C53000-G1176-C182-3
Figure 6-19 Saving annunciations
−
Example
Click
Save
. The annunciations are saved. Proceed analogously to save further en-
tries. You cannot save entire annunciations groups for the bay units as is possible
for the central unit.
6.3.3.2
Deleting Annunciations
from the PC
with DIGSI
To delete annunciations of the
central unit
(PC linked to central unit) proceed as fol-
lows:
Click
Annunciations
in the navigation window.(see e.g. Chapter 6.2.1.1, page
214). The annunciation groups are shown in the function selection.
Right-click the desired annunciation group in the navigation window. Click
Delete
in the context menu. Next a security prompt takes place.
Click
Yes
to delete the data.
To delete annunciations of a single
bay unit
(PC linked to central unit or bay unit) pro-
ceed as follows:
Open the corresponding bay unit in the DIGSI Manager.
Click
Control
in the navigation window and select the entry
General Device Set-
tings
in the function selection. The OTHER OPTIONS window opens.
Note
When deleting fault events the corresponding fault records are also erased. And the
counters for the network fault number and the fault record number are reset to zero.
If, however, you delete fault records, the fault record numbers and both counters
remain unaffected.
www
. ElectricalPartManuals
. com
