Siemens SIPROTEC 7SA511, Instruction Manual, Page: 299 / 326

$SSHQGL[ 6$
9
&*&
2004 dR/dT Rate of change of P/S vector dR/dT
min. 0 Ï/s
max. 200 ©©©©
2005 P/S T-ACT. Power swing action time P/S T-ACT.
min. 0.01 s
max. 32.00/Ñ ©©©©
©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©
2100 TELEPROTEC PERM. UNDERREACH
2101 PUTT Permissive underreach transfer trip
ON [ ] on
OFF [ ] off
2102 PUTT MODE Permissive underreach transfer trip mode
Z1B ACCELERATION [ ] Z1B acceleration
FD ACCELERATION [ ] FD acceleration
2103 T-SEND-PRL Send signal prolongation for PUTT
min. 0.01 s
max. 32.00 ©©©©
2104 T-REC-PROL Receive signal prolongation for PUTT
min. 0.00 s
max. 32.00 ©©©©
2106 T-SEND-DEL Send signal delay for PUTT
min. 0.00 s
max. 32.00 ©©©©
©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©
2200 TELEPROTEC PERM. OVERREACH
2201 POTT Permissive overreach transfer trip
ON [ ] on
OFF [ ] off
2202 POTT MODE Permissive overreach transfer trip mode
Z1B RELEASE [ ] Z1B release
FD DIREC RELEASE [ ] Direct. comparison
Z1B UNBLOCK [ ] Unblocking with Z1B
FD UNBLOCK [ ] Unblocking with FD
Z1B BLOCKING [ ] Blocking with Z1B
PILOT WIRE COMP. [ ] Comp. via pilot wire
REVERS INTERLOCK [ ] Reverse interlocking
2203 T-TRANSBLO Transient blocking time after external fault
min. 0.01 s
max. 32.00 ©©©©
2204 T-WAIT Waiting time for trans.block. (missing recept)
min. 0.01 s
max. 32.00/Ñ ©©©©
2206 T-SEND-PRL Send signal prolongation for POTT
min. 0.01 s
max. 32.00 ©©©©