Siemens SIPROTEC 7SA511, Instruction Manual, Page: 298 / 326

$SSHQGL[ 6$
9
&*&
1629 ANG. PHIAE Fault det. ph-e angle betw. RA1E/RA2E PHI AE
min. 30 Ý
max. 80 ©©©©
©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©
1700 FAULT IN EARTHED NETWORKS
1701 Ue> Displacement voltage for earth fault det. Ue>
min. 2 V
max. 100/Ñ ©©©©
1703 PHPHE FLTS Loop selection with Ph-Ph-E faults
PHASE-PHASE ONLY [ ] Phase to phase only
LEADING PH-E [ ] Leading phase-earth
LAGGING PH-E [ ] Lagging phase-earth
1704 3PH FAULTS Loop selection with 3phase faults
E/F CONTROL [ ] Dependent on E/F det
PHASE-PHASE ONLY [ ] Phase to phase only
PHASE-EARTH ONLY [ ] Phase to earth only
1705 1PH FAULTS Loop select. for single ph. w/o earth flt.det.
PHASE-EARTH [ ] Phase-earth
PHASE-PHASE [ ] Phase-phase
©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©
1800 FAULT NON-EARTHED NET
1801 TIe 1PHASE Delay time for single phase flt. det. TIe 1PH
min. 0.00 s
max. 0.50/Ñ ©©©©
1802 Ue> Displacement voltage for earth fault det. Ue>
min. 10 V
max. 100 ©©©©
1803 PHASE PREF Phase preference for double earth faults
L3(L1) ACYCLIC [ ] L3(L1) acyclic
L1(L3) ACYCLIC [ ] L1(L3) acyclic
L2(L1) ACYCLIC [ ] L2(L1) acyclic
L1(L2) ACYCLIC [ ] L1(L2) acyclic
L3(L2) ACYCLIC [ ] L3(L2) acyclic
L2(L3) ACYCLIC [ ] L2(L3) acyclic
L3(L1) CYCLIC [ ] L3(L1) cyclic
L1(L3) CYCLIC [ ] L1(L3) cyclic
©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©
2000 POWER SWING
2002 P/S PROGR. Program of power swing (P/S) function
BLOCK ALL [ ] Block all zones
BLOCK Z1 ONLY [ ] Block Z1 only
BLOCK ALL BUT Z1 [ ] Block all but Z1
OUT-OF-STEP TRIP [ ] Out-of-step trip
2003 Delta R Distance between P/S and fault detect. polygon
min. 0.10 Ï
max. 50.00 ©©©©