Siemens SIPROTEC 6MD665, Manual

Page: 116 / 222

3 Installation and Commissioning
102
6MD665 Manual
C53000-G1876-C103-3
Table 3-2 Jumper position of the neutral position of the Life contact on the I/O-1 input/
output module
Table 3-3 Jumper position of the control voltages of binary inputs BI1 to BI8 on the I/O-
1 input/output module
1)
Factory settings for devices with rated supply voltages of 24 V DC to 60 V DC
2)
Factory settings for devices with rated supply voltage DC 110 V
3)
Factory settings for devices with rated supply voltages of 220 V DC to 250 V DC
Jumper Open in the quiescent
state
Closed in the quiescent state Presetting
X40 1–2 2–3 2–3
Binary Input Jumper Threshold 17 V
1)
Threshold 73 V
2)
Threshold 154
V
3)
BI1 to BI8 X21/X22 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)
BI1 to BI8 X23/X24 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)
BI1 to BI8 X25/X26 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)
BI1 to BI8 X27/X28 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)
BI1 to BI8 X29/X30 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)
BI1 to BI8 X31/X32 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)
BI1 to BI8 X33/X34 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)
BI1 to BI8 X35/x36 1(L)–1(L) 2(M)–2(M) 3(H)–3(H)