Table of contents
SIPIX MO/SD ZN
Entry-ID: 109792654, 04/2021
84
©
S
iem
e
n
s A
G
2021
A
ll r
igh
ts
re
se
rv
e
d
7.5.2
Installing and Removing the Battery
Insert Battery Pack
To insert the battery pack, proceed as follows:
1. Disconnect all cables from the tablet PC.
2. Turn the tablet over so that the back is facing up.
3. Locate the battery lock slide of the battery compartment and push it to the
unlocked position.
4. Locate the battery release slide, which is spring loaded. Pull and hold it back.
5. Insert the battery with the terminal pins first, then push it into the battery
compartment. Hold the battery release slide until the battery is fully inserted.
6. Before releasing the battery release slide, ensure the battery is fully inserted in
the battery compartment. When fully inserted, the battery is flush with the case.
