Siemens SiPass integrated Reference Manual Download Page 6

Page: 6 / 66

Supported Image Formats

6 | 66

A6V11144326

Supported Image Formats

This section lists all of the image file formats that are supported by the SiPass

integrated Photo ID and Graphics functionality.
The following table lists graphics file formats that are supported by SiPass

integrated. They may be used in any aspect of the SiPass integrated

Graphics

Module, and as background images.

Supported Format

File Extension

Maximum Colors

ASCII TEXT (Version 5)

TXT

N/A

Windows Bitmap

BMP

16.7 million

CALS (Computer-aided Acquisition and Logistics

Support)

CAL

DCX

16.7 million

EPS

16.7 million

GEM IMG

IMG

GIF

256

Halo CUT

CUT

256

ICO (ICON)

ICO

IFF (Amiga)

IFF

16.7 million

IOCA

ICA

JPEG

JPG

16.7 million

LaserView

MacPaint

MAC

Microsoft Windows Paint MSP

MSP

PCX

16.7 million

PSD (Photoshop)

PSD

16.7 million

Photo CD

PCD

16.7 million

PICT

PCT

16.7 million

Pixmap

XPM

256

SUN RASTER

RAST, RAS, IM, IM1,
IM8, IM24, IM32

16.7 million

TARGA

TGA

16.7 million

TIFF (Tagged Image File Format)

TIF

16.7 million

WMF (Windows Metafile)

WMF

16.7 million

WPG (WordPerfect Metafile)

WPG

256

Xbitmap

XBM, BM

AutoCAD (Document Exchange Format)

DXF

N/A

Summary of Contents for SiPass integrated



































































Search results

Summary of Contents for SiPass integrated

Reviews:

Siemens SiPass integrated, Reference Manual, Page: 6 / 66

Search results

Summary of Contents for SiPass integrated

Reviews: