Siemens SINUMERIK Commissioning Manual Download Page 697

Page: 697 / 736

Install software and updates

3.3 How to install and authorize SIMATIC STEP 7

PCU-Basesoftware (IM8)
Commissioning Manual, 03/2009, 6FC5397-1DP10-4BA0

3.3

How to install and authorize SIMATIC STEP 7

Overview

SIMATIC STEP 7 V5.4 SP1 can also be installed on the PCU.

Delivery item:

SIMATIC STEP 7 V5.4 SP1

Components:

SIMATIC STEP 7 V5.4 SP1 and
Add-on for SINUMERIK 840Di sl/840D sl/840D

Type of delivery:

1 installation DVD

System requirements:

PCU-Basesoftware V8.0 or higher
A network connection or a connection to a DVD drive is required.
Recommendation: Mouse port

Note
The "MPI driver" package available on the PCU is part of the HMI software and must not be

uninstalled!

Installation under Windows XP

You must follow the installation sequence described here!
1.

Boot up the PCU in the service desktop.

Access DVD (via network or external DVD drive) and call up SETUP.EXE in the root

directory there.

The installation proceeds with operator prompting. The installation directory for STEP 7

should be changed to F:\... where the directory in F: can be freely selected.

The prompt for "Transfer license keys" must be answered with "No, transfer the license

keys later." The licensing is done after the installation of SINUMERIK add-on. Once

installation is complete, the PC will need to be rebooted. During boot up, select the

service desktop again.

Switch to the Sinumerik_Add_on directory on the DVD and call SETUP.EXE. The

installation proceeds with operator prompting. Once installation is complete, the PC will

need to be rebooted. During boot up, select the service desktop again.

Start the link "STEP7 authorizing" on the service desktop. This authorizes STEP 7 and it

can now be started from the HMI Advanced operator interface (STEP 7 appears as its

own operating area on the expansion bar of the area menu, protected with access

level 3).

Summary of Contents for SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands

Siemens SINUMERIK, Commissioning Manual

Search results

Summary of Contents for SINUMERIK

Reviews:

Related manuals for SINUMERIK

Brands by name

Popular brands