manualshive.com logo in svg

Siemens SINUMERIK MC, Commissioning Manual

Share
Download
Siemens SINUMERIK MC Commissioning Manual Download Page 232

Result

The F-capable PLC variables have been created.

Figure 6-4

Example: Variable table

6.3.3

Adapting the settings of the F-runtime group (optional)

You can find the associated F-blocks of an F-runtime group in folder "Program blocks" or in the 

Safety Administration Editor under "F-blocks":
● FOB_RTG1[OB123]
● Main_Safety [FB1010]
● Main_Safety_DB [DB1010]
You can adapt the default settings of the F-runtime group and the associated blocks, as 

described here.
Optionally, you can also create a second F-runtime group; for example, to organize safety-

relevant program sections that are executed quickly, in their own dedicated F-runtime group.

Precondition

● Safety Integrated is active

Commissioning and configuring
6.3 Generating a safety program

Safety Integrated (with SINAMICS S120)

232

Commissioning Manual, 02/2020, A5E46305916B AB

Summary of Contents for SINUMERIK MC

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands