Procedure
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder
in which you would like to create the file.
3.
Press the "New" and "Any" softkeys.
The "Any New Program" window opens.
4.
Select a file type from the "Type" selection field (for example, "Definitions
GUD") and enter the name of the file to be created when you have se‐
lected a workpiece directory in the NC memory.
The file automatically has the selected file format.
- OR -
Enter a name and file format for the file to be created (e.g. My_Text.txt).
5.
Press the "OK" softkey.
14.4.7
Creating a job list
For every workpiece, you can create a job list for extended workpiece selection.
In the job list, you specify instructions for program selection in different channels.
Syntax
The job list contains the SELECT instructions.
SELECT <program> CH=<channel number> [DISK]
Managing programs
14.4 Creating a directory / program / job list / program list
Turning
790
Operating Manual, 06/2019, A5E44903486B AB
