manualshive.com logo in svg

Siemens SINUMERIK 840D sl, Operating Manual, Page: 71 / 942

Share
Download
Siemens SINUMERIK 840D sl Operating Manual Download Page 71

Multitouch operation with SINUMERIK Operate

3

3.1

Multitouch panels

The "SINUMERIK Operate Generation 2" user interface has been optimized for multitouch 

operation. You can execute all actions by touch and finger gestures. Using SINUMERIK 

Operate is much quicker with touch operation and finger gestures.

Machine manufacturer
Please observe the information provided by the machine manufacturer.

The following operator panel fronts, handheld devices and SINUMERIK control systems can be 

operated with the "SINUMERIK Operate Generation 2" user interface:
● OP 015 black
● OP 019 black
● PPU 290.3
● HT 8 
● SIMATIC ITC V3
● SIMATIC IFP
● SIMATIC panel IPC

Additional information
You can find more information on the topic of "user interface" at:
● SINUMERIK Operate Commissioning Manual (IM9), 840D sl
● SINUMERIK Operate Commissioning Manual (IH9), 828D
You can find additional information on multitouch panels at:
● Operating components - handheld devices, SINUMERIK 840 D sl (OP 015 black / 019 black)
● PPU and Components Manual, SINUMERIK 828D (PPU 290.3)

Turning

Operating Manual, 06/2019, A5E44903486B AB

71

Summary of Contents for SINUMERIK 840D sl















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments