Siemens SINUMERIK 840D sl Operating Manual Download Page 183

Page: 183 / 942

Note
Copy/cut current line
To copy and cut the current line where the cursor is positioned, it is not necessary to mark or

select it. You have the option of making the "Cut" softkey only operable for marked program

sections via editor settings.

6.10.4

Renumbering a program

You can modify the block numbering of programs opened in the editor at a later point in time.

Precondition

The program is opened in the editor.

Procedure

Press the ">>" softkey.
A new vertical softkey bar appears.

Press the "Renumber" softkey.
The "Renumbering" window appears.

Enter the values for the first block number and the increment to be used

for numbering.

Press the "OK" softkey.
The program is renumbered.

Note
● If you only want to renumber a section, before the function call, select the program blocks

whose block numbering you want to edit.

● When you enter a value of "0" for the increment size, then all of the existing block numbers

are deleted from the program and/or from the selected range.

Machining the workpiece

6.10 Editing a program

Turning

Operating Manual, 06/2019, A5E44903486B AB

183

Summary of Contents for SINUMERIK 840D sl















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK 840D sl

Reviews:

Brands by name

Popular brands

Siemens SINUMERIK 840D sl, Operating Manual

Search results

Summary of Contents for SINUMERIK 840D sl

Reviews:

Brands by name

Popular brands