4. Press the "Change" softkey to open the "Machine identity" dialog box.
5. Select, for example, the "End user" softkey to check and complete the contact data of the
end user.
Note
Contact data
Using the "Import data" softkey, templates with contact data can be imported to simplify
data entry; these templates are available through Siemens sales partners.
3.7.2
This is how you make a new entry in the logbook
Generating a new logbook entry
In order to log service and diagnostic procedures at the machine, make an entry in the machine
logbook. The activities performed should be documented here after each service call.
Service cases - software
3.7 Machine registration
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1
73
