K2: Axis Types, Coordinate Systems, Frames
10.5 Frames
Basic Functions
796
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
10.5.12.3 RESET, end of part program
RESET responses of basic frames
The RESET response of basic frames is set via the machine data:
MD20110 $MC_RESET_MODE_MASK (definition of initial control settings after RESET/TP-End)
RESET responses of system frames
The system frames are retained in the data management after a Reset.
The machine data below can be used to configure the activation of individual system frames:
MD24006 $MC_CHSFRAME_RESET_MASK (active system frames after Reset)
RESET response of the system frames of TCARR, PAROT, TOROT and TOFRAME
The RESET response of the system frames of
TCARR
,
PAROT
,
TOROT
and
TOFRAME
depends on the G-Code
RESET setting.
The setting is made with machine data:
MD20110 $MC_RESET_MODE_MASK (definition of initial control settings after RESET/TP-End)
MD20152 $MC_GCODE_RESET_MODE[ ] (RESET response of G groups)
MD20150 $MC_GCODE_RESET_VALUES (RESET position of G groups)
Bit
Significance
0
System frame for actual value setting and scratching is active after RESET.
1
System frame for zero offset external is active after RESET.
2
Is not evaluated.
3
Is not evaluated.
4
System frame for workpiece reference point is active after RESET.
5
System frame for cycles is active after RESET.
6
Reserved, RESET response depends on MD20110 $MC_RESET_MODE_MASK.
7
System frame $P_ISO1FR is active after RESET.
8
System frame $P_ISO2FR is active after RESET.
9
System frame $P_ISO3FR is active after RESET.
10
System frame $P_ISO4FR is active after RESET.
11
System frame $P_RELFR is active after RESET.
