Siemens SINEMA Remote Connect Page 64 Operating Instructions Manual Download

Page: 64 / 122

Configuring with Web Based Management

4.6 System

SINEMA Remote Connect - Server

Operating Instructions, 11/2017, C79000-G8976-C383-04

4.6.9

Debug login

The Debug login allows your Siemens contact access to the SINEMA RC Server for a certain

time. In SINEMA RC Server, there are predefined user names intended for service and

debugging purposes via SSH.
On this page, you specify the password for the Debug login.

Calling the Web page

In the navigation, select "System > Debug-Login".

Activating Debug login

Make the following settings:

Box

Meaning

Debug login timeout

(minutes)

Specify the duration of the access.
When this time elapses user is automatically logged off.

Debug login port

Specify the TCP port via which the system of the SINEMA RC

Server is accessed.
You may need to set up PORT forwarding to SINEMA RC on the

Internet

router.

Debug login password

Enter the password.
The new password must be at least 8 characters long and contain

special characters, upper and lowercase characters as well as

numbers, refer to the section "Permitted characters (Page 21)".

Confirm debug login pass-

word

Confirm this password.

Activate "Enable debug login" and click on "Save".
When the settings are saved, the remaining time is displayed in the "Remaining time

(minutes)" box.

Deactivating Debug-Login

Deactivate "Enable debug login" and click on "Save".
The settings are returned to the default values and the password is deleted.

Summary of Contents for SINEMA Remote Connect



























































































































Search results

Summary of Contents for SINEMA Remote Connect

Reviews:

Related manuals for SINEMA Remote Connect

Brands by name

Popular brands

Siemens SINEMA Remote Connect, Operating Instructions Manual

Search results

Summary of Contents for SINEMA Remote Connect

Reviews:

Related manuals for SINEMA Remote Connect

Brands by name

Popular brands