6. Enter the parameter of the drive object in the accompanying input fields.
– First field: Parameter number
– Second field: Index
– Third field: Bit number
The parameter name is now displayed on the right of the input fields. If the parameter
requires no index or bit, the fields remain empty.
7. Click the "Add" button. to add the parameter to the parameter list.
8. Repeat steps 5 to 7 for each drive object that you want to create in the parameter list.
9. Save the parameter list on the memory card of the drive under the directory "OEM/
SINAMICS/HMI/PARLISTS"". To do this, click the "Save list" button
to create a new tab for the new parameter list. The name of the parameter list appears in
the tab. You can view the actual parameter values and change them when required via this
tab.
10.If you wish to change the order of parameters within the current parameter list, you have
two options:
● Move a selected parameter to the desired position in the list using the "UP" and "DOWN"
buttons.
● Drag and drop a selected parameter to the desired position in the list.
5.6.8.2
Deleting a parameter list
Either the entire parameter list or individual elements of a selected parameter list can be
deleted in the "Parameter" display area.
Note
In order to delete you will need the "Change list" right for the selected parameter list. For more
information, refer to the chapter titled "Access protection for parameter lists in the web server
Security measures for SINAMICS
5.6 Web server
Industrial Security
70
Configuration Manual, 08/2017, A5E36912609A
