Siemens SINAMICS V20 Series, Operating Instructions Manual

Page: 221 / 274

Parameter list
7.2 Parameter list
SINAMICS V20 Inverter
Operating Instructions, 07/2012, A5E03728167
221
Parameter Function Range Factory
default Can be
changed Scaling Data
set Data
type Acc.
Level
Dependency: P2802[2] assigns the timer to the processing sequence.
P2860
Delay time of timer 3 [s] 0.0 -
9999.9
0.0 U, T - - Float 3
Defines delay time of timer 3. P2859, P2860, P2861 are the inputs of the timer, outputs are r2862, r2863.
Dependency: See P2859
P2861
Mode timer 3 0 - 13 0 U, T - - U16 3
Selects mode of timer 3. P2859, P2860, P2861 are the inputs of the timer, outputs are r2862, r2863. See
P2851 for value description.
Dependency: See P2859
r2862.0
BO: Timer 3 - - - - - U16 3
Displays output of timer 3. P2859, P2860, P2861 are the inputs of the timer, outputs are r2862, r2863. See
r2811 for the bit field description.
Dependency: See P2859
r2863.0
BO: Nout timer 3 - - - - - U16 3
Displays Not-output of timer 3. P2859, P2860, P2861 are the inputs of the timer, outputs are r2862, r2863.
See r2811 for the bit field description.
Dependency: See P2859
P2864
BI: Timer 4 - 0 U, T - - U32 /
Bin
3
Define input signal of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are P2867, P2868.
Dependency: P2802[3] assigns the timer to the processing sequence.
P2865
Delay time of timer 4 [s] 0.0 -
9999.9
0.0 U, T - - Float 3
Defines delay time of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867, r2868.
Dependency: See P2864
P2866
Mode timer 4 0 - 13 0 U, T - - U16 3
Selects mode of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867, r2868. See
P2851 for value description.
Dependency: See P2864
r2867.0
BO: Timer 4 - - - - - U16 3
Displays output of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867, r2868. See
r2811 for the bit field description.
Dependency: See P2864
r2868.0
BO: Nout timer 4 - - - - - U16 3
Displays Not-output of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867, r2868.
See r2811 for the bit field description.
Dependency: See P2864
P2869[0...1] CI: ADD 1
- 0 U, T 4000H - U32 /
I16
3
Define inputs of Adder 1, result is in r2870.
r2870
x1
x2
200%
-200%
P2800 P2802[4]
= x1 + x2
x1 + x2 > 200%
→
x1 + x2 < -200%
→
= 200%
= - 200%
P2869
x1 + x2
,QGH[
,QGH[
5HVXOW
Result
5HVXOW
5HVXOW ,I
Index: [0] Connector input 0 (CI 0)
[1] Connector input 1 (CI 1)