Siemens SINAMICS PERFECT HARMONY GH150 Page 18 Function Manual Download

Page: 18 / 136

• Operator panel: The operator panel has two ports: X1P1 and X2P1. The port X2P1 has a

fixed network IP that connects to the p3 port of the Scalance.

• Scalance: The p5 port of the Scalance is reserved as service port.

Note

The dual circuits feature for GH150 converters will be delivered soon.

4.3

HMI App starting screen

Switch on the operator panel, HMI App is loaded automatically. The "Home" screen page is
shown as the starting screen page.

The "Home" screen displays the following information about the initial status of the converter:

• Actual values of the converter

• The current status of the converter.

The details of this screen is in Section "Home" screen (Page 55).

Product overview
4.3 HMI App starting screen

Operator panel for SINAMICS Perfect Harmony GH150 air-cooled MV Converters

Function Manual, 12/2022, A5E51241343A

Summary of Contents for SINAMICS PERFECT HARMONY GH150









































































































































Search results

Summary of Contents for SINAMICS PERFECT HARMONY GH150

Reviews:

Related manuals for SINAMICS PERFECT HARMONY GH150

Brands by name

Popular brands

Siemens SINAMICS PERFECT HARMONY GH150, Function Manual

Search results

Summary of Contents for SINAMICS PERFECT HARMONY GH150

Reviews:

Related manuals for SINAMICS PERFECT HARMONY GH150

Brands by name

Popular brands