Menu
8.6 Customer parameter sets
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
61
8.6
Customer parameter sets
Overview
Custom parameter sets can now be created and stored on the Intelligent Operator Panel (IOP-
2).
The IOP-2 can store up to 255 parameter sets with customized names.
The steps to create and store a custom parameter set on the IOP-2 is given in the procedure
outlined below.
Note
Custom parameter set filename limitations
Although the filename for a custom parameter set can be up to 96 characters in length, if all
the filenames are 96 characters long, it will eventually limit the number of parameter sets
that can be saved on the IOP-2.
This is due to the specialized nature of the IOP-2's internal memory system.
Standard parameter set access
New standard parameter sets can be uploaded from the drive to the IOP-2, these files will be
stored in the "user/cps" folder on the IOP-2.
Parameter set naming convention
The IOP-2 automatically names the uploaded parameter sets using the following naming
convention:
yymmdd-hhmm-PS???, where ??? is the sequential parameter set number.
When the IOP-2 is connected to a control Unit with a Real-Time Clock (RTC), it will display the
parameter set filename with the current time and date stored on the IOP-2, for example,
180125-1126-PS001.
When the IOP-2 is connected to a Control Unit without a RTC, it will display the parameter set
filename as yymmdd-hhmm-PS001, so only the parameter set number will be changed.
Deletion of characters or filename
When editing the filename with the on-screen keyboard the following actions should be
noted:
•
When the name is displayed, typing any character will append the character to the
filename automatically.
•
When the filename is first displayed, the whole filename can be deleted by a two second
press of the OK button.
•
If individual characters need to be deleted, then use the on-screen keyboard backspace
icon.