Parameter Description
p9762
New password
p9763
Password confirmation
6.15.2.3
Interconnecting the "STO active" signal
If you require the feedback signal "STO active" of the inverter in your higher-level control
system, then you must appropriately interconnect the signal.
Procedure with STARTER and Startdrive
To interconnect the "STO active" checkback signal, proceed as follows:
1. Select the button for the feedback signal.
$
%
The screen form varies depending on the interface selected.
(A)
Input terminals
(B)
PROFIsafe interface
Figure 6-24 Interconnecting "STO active" in STARTER
$
The screen form varies depending on the interface selected.
(A)
Control type
Figure 6-25 Interconnecting "STO active" in Startdrive
2. Select the signal that matches your particular application.
Advanced commissioning
6.15 Safe Torque Off (STO) safety function
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
221
