Appendix
A.1 Application examples
Frequency inverters with Control Units CU230P-2 HVAC, CU230P-2 DP, CU230P-2 CAN
334
Operating Instructions, 01/2011, FW 4.4, A5E02430659B AD
A.1.3
Configuring slave-to-slave communication in STEP 7
Two drives communicate via standard telegram 1 with the higher-level control. In addition,
drive 2 receives its speed setpoint directly from drive 1 (actual speed).
&R
Q
WU
R
O
352),%86'3PDVWHUV\VWHP
' U L YH VX E V F U L E H U
7H O H J U D P I R U I U H H S D U D P H W H U L ] D W L R Q
' U LYHSXEOLVKHU
6 W D Q G D U GWH O H J U D P3= '
&RQWUROZRUG
0DLQVHWSRLQWS
&RQWUROZRUG
6WDWXVZRUG
6WDWXVZRUG
$FWXDOYDOXH
$FWXDOYDOXH
QRWXVHG
QRWXVHG
0DLQVHWSRLQWS
6ODYHWRVODYHFRPPXQLFDWLRQ
$:
(:
$:
(:
$:
(:
$:
(:
3='
3='S>@
3='
3='S>@
3='
3='S>@
3='
3='S>@
3='
3='S>@
3='
3='S>@
3='
3='S>@
3='
3='S>@
3='
3='S>@
3='
3='S>@
Figure A-5
Communication with the higher-level control and between the drives with slave-to-slave communication
Settings in the control
In HW Config in drive 2 (Subscriber),
insert a slave-to-slave communication
object, e.g. "Slave-to-slave, PZD2".
With a double-click, open the dialog
box to make additional settings for the
slave-to-slave communication.
Summary of Contents for SINAMICS G120 CU230P-2
Page 2: ......