11.3
SINAMICS G110M specifications
Power-dependent performance ratings
Note
UL certified Fuses must be used
UL certified Fuses must be used" it should state "In order that the system is in compliance with
UL requirements, UL listed class J fuses must be used. The fuse rating of these fuses must be
equal to or less that the ratings given in
Table 4-2 Rated Output, Input and Fuses (Page 60).
IP protection of the system
The Power Module and the Terminal Housing (which includes the Control Module) when fully
assembled and attach to the motor has an IP rating of IP65/66 depending on the version of the
Control Module.
Table 11-1
PM240M, Frame Sizes A, Class A filter, 3 AC 380 V … 480 V
Article No.
6SL3517-…
…1BE11-3AM0
…1BE12-3AM0
...1BE13-3AM0
Rated / LO power
Rated / LO input current
Rated / LO Output current
0.37 kW
1.3 A
1.3 A
0.75 kW
2.0 A
2.2 A
1.1 kW
2.8 A
3.1 A
HO power
HO input current
HO output current
0.37 kW
1.3 A
1.3 A
0.75 kW
2.0 A
2.2 A
1,1 kW
2.8 A
3.1 A
Fuse
10 A, class J, CC
10 A, class J, CC
10 A, class J, CC
Power losses
0.012 kW
0.014 kW
0.2 kW
Required cooling air flow
4.8 l/s
4.8 l/s
4.8 l/s
Cross section of line and motor cable
1 … 2.5 mm
2
18 … 14
AWG
1 … 2.5 mm
2
18 … 14
AWG
1 … 2.5 mm
2
18 … 14
AWG
Tightening torque for line and motor cable
0.5 Nm / 4 lbf in
0.5 Nm / 4 lbf in
0.5 Nm / 4 lbf in
Weight
2.1 kg
2.1 kg
2.1 kg
Table 11-2
PM240M, Frame Sizes A, Class A filter, 3 AC 380 V … 480 V
Article No.
6SL3517-…
…1BE14-3AM0
Rated / LO power
Rated / LO input current
Rated / LO Output current
1.5 kW
3.6 A
4.1 A
HO power
HO input current
HO output current
1,5kW
3.6 A
4.1 A
Fuse
10 A, class J, CC
Power losses
0.04 kW
Required cooling air flow
4.8 l/s
Technical data
11.3 SINAMICS G110M specifications
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
391