8.6.9
Slave-to-slave communication
Overview
"Direct data exchange" is sometimes called "slave-to-slave communication" or "data exchange
broadcast". With direct data exchange, slaves exchange data without any direct involvement of
the master.
Additional information
Further information about the "Direct data exchange" function is provided in the Fieldbus
function manual.
Manuals for your converter (Page 415)
8.6.10
Acyclically reading and writing converter parameters
Overview
The converter supports the writing and reading of parameters via acyclic communication:
• For PROFIBUS: Up to 240 bytes per write or read request via data set 47
• For PROFINET: Write or read requests via B02E hex and B02F hex
Example
Application example, "Read and write to parameters"
Further information is provided on the Internet:
Application examples (
https://support.industry.siemens.com/cs/ww/en/view/29157692
)
Further information
Further information about acyclic communication is provided in the Fieldbus function manual.
Manuals for your converter (Page 415)
Advanced commissioning
8.6 Drive control via PROFIBUS or PROFINET
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
207