Siemens Sinamics Connect Series Operating Instructions Manual Download Page 40

Page: 40 / 101

Configuring the device

5.2 Standard Web pages

SINAMICS CONNECT

Operating Instructions, 10/2018, A5E45421408

5.2

Standard Web pages

5.2.1

First login

5.2.1.1

Logging in

In the case of the first login, after you enter the URL of the SINAMICS CONNECT Web

address, the Web browser goes to the first login page.

Requirement

●

You have never logged in to the Web server.

●

You have accessed the Web pages successfully.

Procedure

Enter the default user name (Admin) and default user password (Admin) in the Username

and Password input fields respectively.

Click "Login" to log in to the Web server.

Note
Currently, you are not permitted to change the default user name.

Result

●

If you enter the correct user name and password, the Web browser opens the page for

changing the default password (Page 39).

●

If you enter the incorrect user name and/or password, the login fails. In this case, the

background of the input field(s) becomes red, prompting you to correct the name and/or

password.

Summary of Contents for Sinamics Connect Series






































































































Search results

Summary of Contents for Sinamics Connect Series

Reviews:

Siemens Sinamics Connect Series, Operating Instructions Manual, Page: 40 / 101

Search results

Summary of Contents for Sinamics Connect Series

Reviews: