5. Close the miniature circuit breaker for the connectivity module.
The IPC powers up, starts Windows and the service for RDP. This can take several minutes.
6. When Windows and the service for RDP start, set up a Remote Desktop Connection with
RDP from the local service PC to the IPC.
The LAN interface of the IPC for service access has the following configuration set in the
factory:
– IP address: 192.168.0.185
– User name: \AgentAdmin
– Password: Password (Page 19) for the Windows user account
7.2
Activating the internet time
Procedure
1. Open the Windows Control Panel.
2. Open the date and time settings by clicking on link "Date and Time".
3. Click on button "Change time zone".
4. Set the time zone to "(UTC) Coordinated Universal Time" and confirm with "OK".
5. Switch to tab "Internet Time".
6. Click on "Change settings...".
Commissioning
7.2 Activating the internet time
SINAMICS CONNECT 500
28
Operating Instructions, 10/2019
