7.5
Setting the time of day
Proceed as follows:
1. Select the SIMOTION device in the project navigator.
2. Select the Target system > Set time of day menu.
The current date and the time of day of the PG/PC and the SIMOTION device are displayed.
3. Change the date and time of day of the SIMOTION device, if necessary:
If you want to accept the values from the PG/PC:
– Activate the Accept from PG/PC checkbox.
If you want to enter values:
– Deactivate the Accept from PG/PC checkbox.
– Enter the values in the corresponding fields (Module).
Figure 7-9
Setting the time of day
7.6
Loading data to the target system
You have to download the project data that you have created with SIMOTION SCOUT to the
target system. The target system can consist of several CPUs (SIMOTION controllers).
The project data contains the programs (ST, MCC, LAD/FBD, and DCC) that you have created
and compiled, the hardware configuration, and the technology objects that you have created
and to which you have assigned parameters.
Additional references
The exact download procedure is described in:
● SIMOTION Basic Functions Function Manual
Target system
7.6 Loading data to the target system
SIMOTION SCOUT
Configuration Manual, 11/2016
161
