Siemens SIMOTION P320-4 E Page 112 Manual Download

Page: 112 / 166

6.5

Decentralized structure

Overview

The decentralized structure provides greater flexibility in terms of location and enables the

SIMOTION P320-4 to be positioned in non-critical areas of the plant (e.g. control cabinet).
The decentralized structure of a panel with the SIMOTION P320-4 can be performed via the

display port, USB or DVI connection. Please note the cable lengths that are supported for the

panel.
For the use of an HMI system, the SIMATIC IFP, for example, can be connected by means of

the described interfaces.

Installation/mounting
6.5 Decentralized structure

SIMOTION P320-4 E / P320-4 S

112

Manual, 03/2018, A5E36004933B

Summary of Contents for SIMOTION P320-4 E







































































































































































Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands

Siemens SIMOTION P320-4 E, Manual

Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands