Appendix
A
A.1
Service and maintenance
General information
This chapter provides only selected notes on servicing and maintenance.
Please refer to the following operating instructions for comprehensive information:
● SIMOTION D435-2 DP/PN,
● SIMOCRANE CenSOR.
Reflector maintenance
The reflector must be cleaned regularly in accordance with the amount of dirt. All dirt and paint
residues must be removed. The reflector must be checked to ensure that it is securely mounted
as part of the regular crane inspection.
Maintenance of the camera measuring system
The lens must be checked and cleaned depending on the level of soiling. The camera must also
be checked to ensure that it is securely mounted.
Note
For more information, see the operating instructions for the SIMOCRANE CenSOR camera
measuring system [Ref. 1].
Check of the position sensing functions for the hoist after cable changing
After carrying out maintenance work at the hoist and changing the cable, the position sensing
sensor must be checked and should be re-referenced where required.
A.2
References
Ref. 1
SIMOCRANE CenSOR, V2.0 HF3, Camera Measuring System, Operating In‐
structions, 04/2018 Edition
Ref. 2
SIMOCRANE Basic Technology V3.0, Operating Instructions, 06/2012 Edition
Ref. 3
PROFIBUS and PROFINET, PROFIdrive Profile Drive Technology
PROFIBUS User Organization e. V.
Haid-und-Neu-Strasse 7, D-76131 Karlsruhe
PROFIBUS homepage (
Ref. 4
SIMOTION D4x5-2 Manual
D4x5-2_Betreiben_de-DE.pdf, 01/2015 Edition
Ref. 5
SIMOTION D4x5-2 Commissioning and Hardware Installation Manual
D4x5-2_Inbetriebnehmen_de-DE.pdf, 01/2015 Edition
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
435