Safety information
2.2 The 5 safety rules
1LA5/6/7/9, 1LG4/6, 1MA6/7, 1MB..1/2/3/4/5 - SH 63 ... 355
12
Operating Instructions, 06/2018, A5E44455710A
2.2
The 5 safety rules
For your own personal safety and to prevent material damage when carrying out any work,
always observe the safety-relevant instructions and the following five safety rules according
to EN 50110-1 "Working in a voltage-free state". Apply the five safety rules in the sequence
stated before starting work.
5 safety rules
1.
Disconnect the system.
Also disconnect the auxiliary circuits, for example, anti-condensation heating.
2.
Secure against reconnection.
3.
Verify absence of operating voltage.
4.
Ground and short-circuit.
5.
Provide protection against adjacent live parts.
To energize the system, apply the measures in reverse order.
2.3
Qualified personnel
All work at the machine must be carried out by qualified personnel only. For the purpose of
this documentation, qualified personnel is taken to mean people who fulfill the following
requirements:
●
Through appropriate training and experience, they are able to recognize and avoid risks
and potential dangers in their particular field of activity.
●
They have been instructed to carry out work on the machine by the appropriate person
responsible.
2.4
Safe handling
Workplace safety depends on the attentiveness, care, and common sense of the personnel
who install, operate, and maintain the machine. In addition to the safety measures cited, as a
matter of principle, the use of caution is necessary when you are near the machine. Always
pay attention to your safety.
Also observe the following to prevent accidents:
●
General safety regulations applicable in the country where the machine is deployed.
●
Manufacturer-specific and application-specific regulations
●
Special agreements made with the operator
●
Separate safety instructions supplied with the machine
●
Safety symbols and instructions on the machine and its packaging