Siemens SIMOTICS T-1FW68, Configuration Manual

Page: 145 / 194

Preparation for use
7.2 Storage
1FW68 radial segment motors
Configuration Manual, 08/2021, A5E51132930B AA
143
Table 7- 7 Biological ambient conditions
Long-term storage: Class 1B1
Table 7- 8 Chemical ambient conditions
Long-term storage: Class 1C1
Table 7- 9 Mechanically active ambient conditions
Long-term storage: Class 1S2
Table 7- 10 Mechanical ambient conditions
Long-term storage: Class 1M2
7.2.2 Storage in rooms and protection against humidity
The motors can be stored for up to two years under the following conditions:
Storing indoors
• Apply a preservation agent (e.g. Tectyl) to bare external components if this has not
already been carried out in the factory.
• Store the motors as described in Section "Ambient conditions for long-term storage".
The storage room/area must satisfy the following conditions:
– Dry
– Dust-free
– Free of any vibration
– Well ventilated
– Protected against extreme weather conditions
– The air inside the room or space must be free of any aggressive gases
• Protect the motor against shocks and humidity.
• Make sure that the motor is covered properly.