Siemens SIMOTICS T-1FW3, Configuration Manual

Page: 114 / 354

Configuration
5.4 Mounting
1FW3 complete torque motors
112
Configuration Manual, 08/2020, A5E46027705B AA
Mounting the motor frame to the machine on the customer's side
You can mount the motor enclosure of the complete 1FW3 torque motor to the customer's
machine corresponding to the following table:
Table 5- 5 Types of construction
Type of con-
struction
Designation Type of con-
struction
Designation Type of con-
struction
Designation Type of con-
struction
Designation
1FW315 ☐ / 1FW320 ☐
with hollow shaft, plug-on
shaft or solid shaft
1FW328 ☐
with hollow shaft (standard)
1FW328 ☐
with solid shaft
1FW320 ☐ - ☐☐☐☐ 5 /
1FW328 ☐ - ☐☐☐☐ 5
with stub shaft
IM B14 IM B35 IM B3 IM B5
IM V18 IM V15 IM B34 IM V1
IM V19 IM V35 - - IM V3
1FW315 / 1FW320 / 1FW328
Plug-on mounting with torque arm
(not standardized)
Table 5- 6 Mounting the motor frame
Shaft height Type of construction Holes at the DE housing flange Pitch circle diameter
150 IM B14, IM V18/19 12 x M10 295 mm
200 IM B14, IM V18/19 16 x M10 380 mm
280
1)
IM B35, IM V15/35 24 x ∅ 13 mm 532 mm
280
2)
IM B5, IM V1/3 24 x ∅ 17.5 mm 650 mm
280
3)
IM B3, IM B34 8 x M20 525 mm
1)
With hollow shaft
2)
With stub shaft
3)
With solid shaft