Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 156

Page: 156 / 768

6.10.1

Backing up the parameter settings externally

You can back up the converter settings externally on the commissioning device via the web

server.
You can perform the data backup at any time. We recommend a data backup after the

commissioning of the converter.
1. Click "Back up parameters" in the "Parameter Backup" setting area.

The data backup of the parameters is performed. A message is displayed when the data

backup is successful.

Depending on the browser used, a storage dialog appears in which you can specify where

the backup file is to be saved.

In some browsers, e.g. Google Chrome, the file is stored in the standard directory for

downloads as "Backup.zip".

2. Correct the automatically generated name of the data backup so that the required data

backup can be clearly identified by the name when there are several data backups.

Note
The parameterization is saved in encrypted form during a data backup. Therefore, it is not

possible to check or edit parameters.

Commissioning and diagnostics in the Web server
6.10 Backup and restore

SINAMICS S210 servo drive system

154

Operating Instructions, 12/2017, A5E41702836B AA

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIMOTICS S-1FK2

Reviews:

Brands by name

Popular brands

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Search results

Summary of Contents for SIMOTICS S-1FK2

Reviews:

Brands by name

Popular brands