manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Share
Download
Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 124

6.5.3

Using the control panel

The control panel is only used during the commissioning phase to control and monitor the 

drive. The required safety measures must be strictly complied with. It offers the following 

options:
● Monitoring drive movements
● Checking missing enables
● Testing drive movements or traversing manually

Call the control panel

You can always call the control panel when you access the web server in the converter with 

your commissioning device. 
1. To call the control panel, click "Control panel" in the footer of the web server. 

The control panel is started in monitoring mode. 

Figure 6-9

Control panel - Monitoring mode

2. To close the control panel again, click the "Control panel" button again in the footer of the 

web server or on the X at the top right in the header of the control panel. 

Control panel in monitoring mode

When all enables are present, the "Missing Enables" line is not displayed and the "Actual 

speed", "Actual torque" and "Actual current" display fields show the current values of the drive.
If enables are missing, the motor does not turn. In this case the "Missing Enables" LED lights 

up in blue.
1. Click the "Click here for details" link to display the details. 

The "Missing enables" dialog opens:

2. Click "Close" to close the display dialog. 

Control panel in control mode

If you take control, you can test the drive movements or traverse manually. 
1. To call the control panel, click the "Control panel" button in the footer of the web server. 

The control panel is displayed in monitoring mode. 

2. Click the "Take control" button.

Commissioning and diagnostics in the Web server
6.5 Commissioning

SINAMICS S210 servo drive system

122

Operating Instructions, 12/2017, A5E41702836B AA

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands